Praxis Medical Insights

Est. 2024 • Clinical Guidelines Distilled

Made possible by volunteer editors from the University of Calgary & University of Alberta

Last Updated: 7/26/2025

Coagulation Testing Guidelines

Sample Collection and Preparation

  • The International Society on Thrombosis and Haemostasis recommends using plasma collected with a 9:1 ratio of whole blood to 3.2% sodium citrate for coagulation testing, as this is the standardized and recommended sample collection method for accurate results 1
  • The preferred anticoagulant concentration for coagulation testing is 3.2% sodium citrate, which is less sensitive to underfilling effects compared to 3.8% sodium citrate 1, 2
  • Double centrifugation is recommended to ensure a residual platelet count of <10.0 × 10^9/L, which is essential for accurate coagulation test results 1
  • When using a butterfly needle, the first tube of blood should be discarded to avoid underfilling and ensure proper blood-to-anticoagulant ratio, as recommended by the ISTH 3
  • Light-blue top tubes contain 3.2% sodium citrate and must maintain a precise blood-to-anticoagulant ratio (9:1), which can be achieved by filling the tube completely and gently inverting it 3-4 times immediately after collection 3, 2

Processing and Storage

  • The International Society on Thrombosis and Haemostasis recommends centrifuging samples at 2500 ×g for 15 minutes at room temperature for standard processing 4
  • Samples should be processed within 1 hour of collection or properly stored if testing is delayed, to prevent alterations in test parameters 1
  • If testing is delayed, plasma should be frozen at –20°C (for ≤2 weeks) or –70°C (for >2 weeks) to preserve the sample 1
  • Frozen plasma should be rapidly thawed at 37°C and thoroughly mixed before testing to ensure accurate results 1

Transportation and Handling

  • Pneumatic tube transport systems can alter test parameters and should be avoided, as they can cause significant changes in coagulation test results 4
  • The air volume in butterfly tubing (typically 0.5-1.0 mL) can significantly affect the blood-to-anticoagulant ratio in the first tube collected, highlighting the importance of proper collection technique 3

Tube Filling and Mixing

  • Filling blue top tubes to at least 90% of capacity is crucial to avoid falsely elevated results, as underfilling can cause excess anticoagulant and prolonged clotting times 2
  • Proper mixing by gently inverting tubes 3-4 times immediately after collection is essential to ensure accurate coagulation test results 2
  • Underfilled tubes can cause falsely prolonged PT/INR results, especially in patients on warfarin, with higher citrate concentrations (3.8% vs 3.2%) exacerbating the effect 2
  • aPTT is more sensitive to underfilling than PT, with significant prolongation occurring when tubes are filled to less than 90% capacity 2

Consequences of Inaccurate Results

  • Falsely prolonged coagulation tests can lead to inappropriate reduction in anticoagulant dosing, increased thrombotic risk due to subtherapeutic anticoagulation, unnecessary diagnostic workups, and delayed procedures or inappropriate blood product administration 2
  • Inaccurate INR results can lead to inappropriate warfarin dosing decisions, resulting in excessive anticoagulation and increased bleeding risk or inadequate anticoagulation and increased thrombotic risk, according to the American College of Cardiology 2
  • A normal PT or aPTT result from an underfilled tube is likely to be truly normal, as underfilling does not produce false normal results 2

Special Considerations

  • The American Diabetes Association recommends collecting blood directly into EDTA tubes (lavender top) for accurate HbA1c testing, with proper tube filling and gentle inversion (8-10 times) to ensure proper mixing of blood with anticoagulant 5, 6, 7
  • Inaccurate HbA1c results can lead to misdiagnosis of diabetes or prediabetes, inappropriate treatment decisions, and failure to identify patients at risk for complications, as stated by the American Diabetes Association and the Clinical and Laboratory Standards Institute 7, 8, 9, 10
  • Whole blood samples are generally stable for up to 1 week at 4°C, according to laboratory protocols 6
  • Blue-top tubes must be filled completely to maintain the correct blood-to-citrate ratio, as recommended by the ISTH 11
  • Underfilling the tube results in excess citrate relative to blood volume, which spuriously prolongs the PT, according to the American College of Cardiology 2

REFERENCES